MERCURY ONDULEUR ELITE 1200 PRO / UPS

Onduleur Mercury 1200 VA Elite Pro

Caractéristiques techniques Mercury 1200 VA

 

• Auto restart

• Built-in AVR

• Surge protection

• Dataline protection

• Overload protection

• Overcharge protection

• Short circuit protection

• Intelligent battery management

• Battery deep discharge protection

Input voltage 220VAC

Input frequency 50Hz

Input phase Single phase

Input socket With Fuse

Cold Start (0 to 100% load) Press the ON/OFF switch

Input range (220V) 140-300

Rating output (VA). 1200VA

Rating output (W). 720W

Waveform Battery mode(simulated sine wave),AC mode(sine wave)

Power factor 0.6

Rating voltage 220V

Output range 220Vac-7% to +15% in battery mode

Rear Output Socket 4 x Universal – Battery backup

Transfer time TYPICAL4-8ms

Communication Interface optional RS232/RJ11

Rating frequency 50Hz

Line-mode Synchronize with the Utility

Battery mode 50 Hz±1Hz

Line Mode FUSE& firmware protection

Battery Mode Software protection controlled by firmware

Line Mode 110%±5%; Go to fault mode after 5 minutes, 120%±5%; Go to fault mode immediately.

Battery Mode 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately

Rating 2 X 12V/7.5AH (Actual rating 7AH)

Backup time – Typical 20 to 30 mins (depending on load)

Charge current About 1A at normal mode.

Over charge protection 29V±0.2V stop charging, 27.4+/-0.2V recharge

Weight 8.6+/-0.3 Kg

Dimensions per unit packaging 395x205x258mm

Packsize per Master carton 2

Dimensions per Master carton 410x430x273mm